Auber Instruments SYL-2615 Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Controllore Auber Instruments SYL-2615. Auber Instruments SYL-2615 7. Wi-fi bbq controller

Stampa la pagina

AUBER INSTRUMENTS

⑨ Probe 2 input for Food temperature.

⑩ Power output for fan control.

⑪ Power input for controller (12 VDC).

4. LCD Display Modes

Press

Normal Display

Momentarily

Pit: 73 Set:225

Food:71 Out:99

Press

SET

Momentarily

SET

>Step: 1 Pit: 225

Back

Cooking Profile

Figure 2. Switching between different display modes.

4.1 Normal Display Mode

Figure 3. Information displayed on the LCD in the normal operating mode.

① Pit temperature

② Food temperature

③ Set value for pit temperature

④ Output power (percentage)

4.2 Time-Checking Mode

Figure 4. Using Timer/Back key to check cooking time in single-step mode

(left) and in multi-step mode (right).

Press the Timer/Back key can tell you the current timer and step information.

In single step mode, press timer key will show the total running time after your

powered this controller up this time. In multi-step mode, pressing timer key will

display more information, including the elapsed time for current step and total

time for current step (first line); total elapsed time and current step number

(second line).

This key has two more functions: a) Press it in the parameter setting mode will

return back to the upper level menu. This provide a short cut to exit the current

menu. b) Cancel the open lid detection. For details, please see Note 8 in

section 6.2.2.

4.3 Cooking Profile Programming Mode

The controller's cooking profile can be either set to single-step mode (default)

or set to multi-step mode. In the single-step mode, the controller will try to

maintain the pit temperature at the set value of Step 1 as long as the controller

2019.07

Time Checking

Time:

Time: 0:02/ 9:00

0:15

Tot: 0:10 Step: 2

> Control config

System config

Parameter Settings

is on. In the multi-step mode, up to 3 steps can be programmed. Each step

has its own set temperature for pit probe, and its step-ending criterion. A

cooking step can either end by timer or by food temperature. For details,

please check section 6.1.

4.4 Parameter Setting Mode

Figure 5. Access the menu of parameters using SET key.

5. Getting Started

Power on the controller by plugging the barrel connector from the 12 VDC

adapter to the power input port ⑪. Connect the pit probe (probe 1) to socket

⑧, food probe (probe 2) to socket ⑨. Configure the Wi-Fi connection from

your phone using AuberSmart app*. After you have set up the controller and

started fire in your smoker or grill, mount the blower to the smoker/grill, then

plug the blower connector to the fan output port ⑩.

Note *: Please check the supplementary manual for Wi-Fi configuration and

how to use the AuberSmart app.

6. Operation

All cooking profile settings and control parameters can be accessed both from

the device and from the AuberSmart app.

6.1 Set the Cooking Profile

The controller's cooking profile can be either set to single-step mode (default)

or set to multi-step mode. In the single-step mode, the controller will try to

maintain the pit temperature at the set value of Step 1 as long as the controller

is on. In the multi-step mode, up to 3 steps can be programmed. Each step

has its own set temperature for pit probe, and its step-ending criterion. A

cooking step can either end by timer or by food temperature. To switch

between single-step mode and multi-step mode, please check section 6.1.3.

6.1.1 Single-Step Mode

In this mode, you can only access and change the target pit temperature of

Step 1 from the device. The controller will try to maintain the smoker

temperature at the set temperature of Step 1 continuously as long as the

controller is powered on. If this controller is powered off and turned back on

again, it will resume operating in this mode. You can still view and change

other settings in Cooking Profile from the app, but they don't apply to this

mode.

To change the set temperature in single-step mode, press SET key once, it

will show "Step: 1" and the current target pit temperature in the top line. A

curser ">" will be shown on the left indicating which line will be selected. Press

SET key once, the current set temperature should start blinking. Use ▲ and

▼ keys to change the set temperature. When finished, press the SET again

to confirm the change. That number will stop blinking. Press the Timer/Back

key to exit the menu. Or use ▲ or ▼ key to scroll to "Back" and then press

SET key to exit. The display will return to the normal display mode if no key is

pressed in 14 seconds.

WWW.AUBERINS.COM

P2/7