Auber Instruments SYL-3615 Manuale di istruzioni
Sfoglia online o scarica il pdf Manuale di istruzioni per Controllore Auber Instruments SYL-3615. Auber Instruments SYL-3615 7. Wi-fi bbq controller
Anche per Auber Instruments SYL-3615: Manuale di istruzioni (5 pagine)
Stampa la pagina
AUBER INSTRUMENTS
Instruction Manual
Caution
This controller is designed for use under normal operating conditions within
the temperature range of 32°F to 122°F (0°C to 50°C) with a Relative
Humidity of less than 85%. Please refrain from exposing the controller to
water or rain, and avoid placing it under direct sunlight on hot days. When
not in use, store the controller in a cool and dry environment.
This controller comes with a one-year warranty, limited to the controller only.
1. Front Panel and Connection Ports
1. LCD display
2.SET ke y
3.TIMER/BACK ke y
4.Down key
5.Up k ey
12.Power adapter
conne ctor
11.Fan connector
Figure 1. Front panel of a SYL-3615 controller.
Figure 2. Connection ports on the bottom of a SYL-3615.
2024.01
SYL-3615 Wi-Fi BBQ Controller
Firmware v1.1.86
Document version 1.0 (Jan, 2024)
Table 1. Recognizing Different Parts on a SYL-3615.
#
1
2
3
4
5
6
7
8
9
10
11
12
6. Wi-Fi indi cator
13
7. Output indicator
14
15
8. Pit probe
16
17
9. Food probe
10. Probe 3
Name
Description
LCD Display
Show probe readings and other information.
SET Key
* Short-press to access the cooking profile.
* Long-press to access menus.
TIMER / BACK
* Check status (step number, time, and output).
Key
* Cancel the Open-Lid function.
DOWN Key
* Mute the buzzer.
* Scroll down in the menu.
* Decrease the value.
UP Key
* Scroll up in the menu.
* Increase the value.
Wi-Fi Indicator
* Solid: connected to Wi-Fi and the server.
* Slow-blinking: lost connection.
* Fast-blinking: ready to pair (AP mode).
Output Indicator
Display the output status to the fan.
Pit Probe
The probe that measures the pit temperature.
Food Probe
A pointed probe can be inserted into food.
Probe 3
A third probe for monitoring food temperature.
Fan Connector
DC connector from the fan, 2.5 mm x 5.5 mm.
Power Adapter
DC connector, 2.1 mm x 5.5 mm. Supplies 12
Connector
VDC from the power adapter.
P1
Sensor port for the pit probe.
P2
Sensor port for the food probe.
P3
Sensor port for the third probe.
Output to Fan
Output port for the fan, 2.5 mm x 5.5 mm.
Power-In
Power input socket, 2.1 mm x 5.5 mm.
2. Getting Started
2.1 Powering Up the Device
Simply connect the 12 VDC power adapter to a wall outlet and then plug
the barrel connector (2.1 mm x 5.5 mm) to the power-in socket located
on the very left port at the bottom of the SYL-3615 controller (refer to
Figure 2).
The controller's LCD screen should illuminate and display its model
number and the firmware version (Figure 3a) for a few seconds.
Subsequently, the LCD screen will change to the normal display mode
(Figure 3b). The "-H-" is a sensor error code, which means no probe is
connected or detected.
Figure 3(a). The display screen when controller is just powered up.
WWW.AUBERINS.COM
SYL-3615
v1. 1. 86
P1/7