Conairphone TAD2018 Manuale d'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale d'uso per Segreteria telefonica Conairphone TAD2018. Conairphone TAD2018 17. Callkeeper digital answering system
Stampa la paginaRemote Operation (Cont.)
To Retrieve Messages When Recording
Memory Is Full
1. When the message capacity is full, the
unit will announce 3 short beep tones
after answering the phone.
2. Within 10 seconds after, dial your 3
digit security code.
3. Your unit will emit 4 short beep tones
once correct code is detected and
playback all incoming messages.
Troubleshooting Guide
If you have followed the instructions in
this manual, and have difficulty operating
your Answering System, locate the
PROBLEM in the left column below.
Check the corresponding POSSIBLE
CAUSE and CORRECTIVE ACTION
columns to locate and remedy problem.
PROBLEM
POSSIBLE CAUSE
Unit is not
Power failure
operating
properly.
My message
Various
indicator
won't stop
flashing.
No answer
Unit is in the "OFF" mode
DON'T RETURN IT YET!
If the solution to your problem is not
listed below, call our toll-free service
number 1-800-366-0937 and one of our
experts will talk you through the problem.
11
IMPORTANT
Remote message retrieval will not work
when calling from a rotary or push
button pulse dialing phone, unless a tone
generator is used.
Also, some touch tone phones only
output tones for a fraction of a second.
If you experience difficulty with remote
operation, try another phone, or use a
separate tone generator.
CORRECTIVE ACTION
Proceed with a unit reset (see p. 9)
Refer to Understanding Your Message
Indicator (see p. 6)
Check to verify if message counter is lit.
Press Answer ON/OFF control to turn unit on.