Ducati PERFORMANCE 979000152 Manuale - Pagina 13
Sfoglia online o scarica il pdf Manuale per Accessori per moto Ducati PERFORMANCE 979000152. Ducati PERFORMANCE 979000152 16. 999-749 magnesium headlight mounts kit
Stampa la pagina
Abbagliante
23
L
Anabbagliante
VERSIONE USA
Anabbagliante
24
L
23
Abbagliante
19
20
28
19
S
V
U
T
N
8
22
22
24
30
P
M
O
Q
24
29
23
R
Fit the low beam lamp (8) into the lower part of the left
headlamp mount (9).
Note
The low beam lamp can be identified thanks to a satin-
finished ring on the glass surface.
Start screws (4) into their threads working from outside the
headlamp mount to fix the headlamp (8). Then tighten screws to
the specified torque (Sect. C3).
Fit the high beam lamp (19) into the upper part of the left
headlamp mount.
Start screws (4) into their threads working from outside the
headlamp mount to fix the high beam headlamp (8).
Then tighten screws to the specified torque (Sect. C3).
Warning
When working on USA version, take care to fit headlamps in
reverse position. The low beam lamp must be fitted in the upper
part of the headlamp mount and the high beam lamp must be
fitted in the lower part.
Position the front wiring (20) to the left headlamp mount (9), as
shown in the figure.
Insert the connector (21), identified by the wording "AB" on the
high beam lamp (19).
Insert the connector (22), identified by the wording "AN", on the
low beam lamp (8).
Route the instrument panel (23), left front turn indicator (24), right
front turn indicator (25) and parking light (26) wiring branches.
To fit the fuse box (27) on the right headlamp mount (3) as shown
in the figure, start screws (28) into their threads.
Tighten screws (28) to the specified torque (Sect. C3).
Insert connector (29) into air temperature sensor (30) and install
the light relay (31) into the special rubber cap (32).
Cod. ISTR-77UK
Pag. 5/8