Anyload S2 Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura Anyload S2. Anyload S2 15.

operation in 15min.

3.5 Print testing

Press 5/AUTO to select this item, if there is a tick in the end, the print test is

enabled.

Enabling Print testing function can help user to test the printer without

connecting to the scale.

3.6 Stability

The default setting is 03, it's not recommended to change this value.

SN and CN numbers can be used to classify goods, COLO-680DT can easily

set the SN and CN numbers of the goods, and calculate the total weight and

print the statistics data.

• Input SN.

In normal weighing mode, press SN, the digits will be editable , press ENTER

to confirm after input SN numbers.

• Input CN

In normal weighing mode, press CN, the digits will be editable , press ENTER

to confirm after input CN numbers.

4.1.1 Save & Print the statistics weighing data

Refer to Chapter2 General Setting-Print setting, COLO-680DT has two ways

to save and print the weighing data,

If Save & Print is enabled, in the normal weighing mode, single weighing data

will be printed by pressing the SAVE/PRINT, the item number will add one.

After Save & Print several single weighing data, COLO-680DT can print the

total weighing, count number, and print the all the single data details for

checking.

e.g. Input the SN=12345 CN=12 the item No. will be set to 000. Put 5 test

weights on the scale one at a time, press Save/Print after the weighing is

stable. After printing each of its own weighing data, as shown below,

List

------------------

Data: 2012-10-15

SN:12345

CN:12

No.: 001

N.W: 5kg

Page 11 of 15 AL‐Manual‐110ES‐WL‐S2‐En‐103