Anyload S2 Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe Anyload S2. Anyload S2 15 stron.
operation in 15min.
3.5 Print testing
Press 5/AUTO to select this item, if there is a tick in the end, the print test is
enabled.
Enabling Print testing function can help user to test the printer without
connecting to the scale.
3.6 Stability
The default setting is 03, it's not recommended to change this value.
4.Weighing Data Processing
4.1 Statistics
SN and CN numbers can be used to classify goods, COLO-680DT can easily
set the SN and CN numbers of the goods, and calculate the total weight and
print the statistics data.
• Input SN.
In normal weighing mode, press SN, the digits will be editable , press ENTER
to confirm after input SN numbers.
• Input CN
In normal weighing mode, press CN, the digits will be editable , press ENTER
to confirm after input CN numbers.
4.1.1 Save & Print the statistics weighing data
Refer to Chapter2 General Setting-Print setting, COLO-680DT has two ways
to save and print the weighing data,
If Save & Print is enabled, in the normal weighing mode, single weighing data
will be printed by pressing the SAVE/PRINT, the item number will add one.
After Save & Print several single weighing data, COLO-680DT can print the
total weighing, count number, and print the all the single data details for
checking.
e.g. Input the SN=12345 CN=12 the item No. will be set to 000. Put 5 test
weights on the scale one at a time, press Save/Print after the weighing is
stable. After printing each of its own weighing data, as shown below,
List
------------------
Data: 2012-10-15
SN:12345
CN:12
No.: 001
N.W: 5kg
Page 11 of 15 AL‐Manual‐110ES‐WL‐S2‐En‐103