Anyload S2 Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe Anyload S2. Anyload S2 15 stron.

Select 2 to search all the data whose CN Number is the number shown on the

current screen;

Select 3 to search all the data whose CN Number is the number shown on the

current screen;

e.g. Select 1

The screen will show:

SN: 12345 CN:11 Date: 12-10-15

ALL: 25kg

Mem: 0005/2000

005 08:05

004 08:04

003 08:04

002 08:04

001 08:04

Notes:

 Mem: 0005/2000 means the indicator has already saved 5 weighing data,

which can save 2000 weighing data in total.

 Press "SEARCH" to rank all the data according to SN Numbers.

 The memory of the indicator has limit, please clear the memory in time.

 Press 1/Clear to delete all the current search weighing data.

4.3 Clear

In normal weighing mode, press 1/CLEAR, screen shows

User can select deleting the weighing data one by one or deleting all the data.

In Other setting，press 4/L.F to select this item, if there is a tick in the end, the

Peak holding is enabled. In normal weighing mode, press 7/F1 to activate

Peak Holding, there will be a "P" on the screen. Press 7/F1 again, the Peak

Holding function will be turned off, "P" will disappear.

Unscrew the battery cap, replace the flat batteries with the fresh ones, make

sure the batteries are installed properly, then tighten the battery cap.

The scale body will turn off after one hour without operation if you want to use

Page 13 of 15 AL‐Manual‐110ES‐WL‐S2‐En‐103