DuctSox SimpleSox Manuale di installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione per Ventilatore DuctSox SimpleSox. DuctSox SimpleSox 4.

Stampa la pagina

Installation Steps

1. Review materials to confirm all parts fit the pre-determined design.

2. Assess product placement area to confirm the system will fit in the required space.

3. Prepare metal inlet collar for fabric connection.

4. Locate cable anchors and components.

5. Install cable end supports.

6. Install the fabric.

7. Use excess cable and cable clamps for mid-supports.

8. Install cable stops.

9. Rotate Adjustable Air Outlet (AAO) sleeves as needed.

Step 1

Review materials to confirm all parts fit the pre-determined design. READ INSTRUCTIONS THOROUGHLY

BEFORE BEGINNING.

Step 2

Assess product placement area to confirm the system will fit in the required space.

Step 3

Prepare metal inlet collar for fabric connection.

• Confirm inlet air supply location and size.

• SimpleSox

inlets are manufactured 1/2" larger than

specified to fit over metal inlet collar.

• Metal collar length should be 6"–10" to secure fabric inlet.

• Edge guard (provided) should be installed on the edge of

the metal collar to reduce fabric wear on metal edge.

Step 4

Locate cable anchors/components. Tension cable

system includes 1/8" cable and hardware as shown.

Hardware kit includes: 2 turnbuckles (6" draw), 2 eyebolts, 4 cable clamps, and 2 thimbles

Cable Length = 100' (+20' additional)

Step 5

Install cable end supports as required. Hang cable 3" above top of System.

Cable Assembly Kit (includes 2 turnbuckles, 2 thimbles, 2 eyebolts, 4 cable clamps, and 100' of cable)

Suggested SimpleSox

Ceiling Gusset Brace:

1" x 1" angle iron or slotted channel to

attached DuctSox cable hanging system

15' Section

If your SimpleSox

Install cable as shown at right 1.5" above

top of the System.

NOTE: The elbows are meant to be

interchangeable left or right when

connected to the SimpleSox

double zipper allows for this.

5' Section

2' Adjustable

Air Outlet

System has elbows:

System. The

1.5' Section

Installation Guide: SimpleSox

6"–10"

Edge Guard

(Supplied)

1.5"

End

Support

End

Support

90 Degree Elbow

System

0.5' End