DuctSox SimpleSox Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wentylator DuctSox SimpleSox. DuctSox SimpleSox 4 stron.

Drukuj stronę
Installation Steps
1. Review materials to confirm all parts fit the pre-determined design.
2. Assess product placement area to confirm the system will fit in the required space.
3. Prepare metal inlet collar for fabric connection.
4. Locate cable anchors and components.
5. Install cable end supports.
6. Install the fabric.
7. Use excess cable and cable clamps for mid-supports.
8. Install cable stops.
9. Rotate Adjustable Air Outlet (AAO) sleeves as needed.
Step 1
Review materials to confirm all parts fit the pre-determined design. READ INSTRUCTIONS THOROUGHLY
BEFORE BEGINNING.
Step 2
Assess product placement area to confirm the system will fit in the required space.
Step 3
Prepare metal inlet collar for fabric connection.
• Confirm inlet air supply location and size.
• SimpleSox
inlets are manufactured 1/2" larger than
TM
specified to fit over metal inlet collar.
• Metal collar length should be 6"–10" to secure fabric inlet.
• Edge guard (provided) should be installed on the edge of
the metal collar to reduce fabric wear on metal edge.
Step 4
Locate cable anchors/components. Tension cable
system includes 1/8" cable and hardware as shown.
Hardware kit includes: 2 turnbuckles (6" draw), 2 eyebolts, 4 cable clamps, and 2 thimbles
Cable Length = 100' (+20' additional)
Step 5
Install cable end supports as required. Hang cable 3" above top of System.
Cable Assembly Kit (includes 2 turnbuckles, 2 thimbles, 2 eyebolts, 4 cable clamps, and 100' of cable)
Suggested SimpleSox
Ceiling Gusset Brace:
TM
1" x 1" angle iron or slotted channel to
attached DuctSox cable hanging system
15' Section
2
If your SimpleSox
Install cable as shown at right 1.5" above
top of the System.
NOTE: The elbows are meant to be
interchangeable left or right when
connected to the SimpleSox
double zipper allows for this.
5' Section
2' Adjustable
Air Outlet
System has elbows:
TM
System. The
TM
1.5' Section
Installation Guide: SimpleSox
6"–10"
Edge Guard
(Supplied)
3"
1.5"
End
Support
End
Support
90 Degree Elbow
System
TM
0.5' End