ABTECH SAFETY SLIX 100 Manuale di istruzioni e manutenzione - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni e manutenzione per Prodotti per la cura della persona ABTECH SAFETY SLIX 100. ABTECH SAFETY SLIX 100 8. Stretcher
Anche per ABTECH SAFETY SLIX 100: Manuale di istruzioni e manutenzione (20 pagine)

ABTECH SAFETY SLIX 100 Manuale di istruzioni e manutenzione
Loading and Securing a casualty into the
Slix100 Stretcher
The Slix Stretcher should be stored and transported in a Carry Bag.
Remove the Slix Stretcher from the Carry Bag, undo the securing strap and unroll.
Lay on a flat surface, as close to the casualty as is possible, with the Carry Handles down. The head of the
Stretcher should be level with the head of the casualty.
If using a spinal splint:
Place the Slix Spinal Splint onto the Slix Stretcher and attach it to the Spinal Splint Plate with the two fitted
straps provided, Item 100SSA page 3. Place the casualty on the Stretcher with the head located to the top
of the Spinal Splint and centrally positioned.
OR
If the casualty is loaded onto the Spinal Splint away from the Stretcher, move the casualty carefully into the
Stretcher and attach the Spinal Splint to the Stretcher.
Fit the Foot Loops, Item 100FL, to the casualties feet, (do not remove footwear), crossing the straps over,
and adjust buckles. If leg injuries are present it may be necessary to omit one or both Foot Loops.
Starting at the foot, secure the 4 Closure Straps, Item 100MCS, across the Stretcher and tighten securely,
but be careful not to over tighten. Pay particular attention to the Closure Straps at the chest so respiration
is not impaired.
Secure the ends of the Closure Straps so they do not present a snag hazard. Tucking ends in is the
easiest option.
It is recommended that the casualties' arms are inside the Stretcher skin.
Feed the Foot Closure Straps, Item 100FCS, through the small eyelet and back through the buckle. Adjust
until the rollover curves up to reveal the foot carry handle (100FCH). Allowance should be made if a leg
splint is fitted.
When using a training mannequin - do not tighten beyond the label sewn to the strap.
The casualty is now secure and evacuation may begin.
4