Duerkopp Adler 506 Manuale di istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Macchina da cucire Duerkopp Adler 506. Duerkopp Adler 506 8.
Anche per Duerkopp Adler 506: Manuale di istruzioni per l'uso (17 pagine)
Stampa la pagina
1. Scope of Delivery
2. Installation of the Unit
2.1 Transport
2.2 Setting the Work Height
–
Frame with sewing drive and table 1100 x 736 mm
–
Sewing machine with integrated bobbin winder
–
Microcontrol control unit
–
Compressed air maintenance unit
–
Yarn stand
–
Foot switches
–
Sewing light
–
Tools and small parts in the accessories pack
ATTENTION !
The unit may only be set up by trained personnel.
Before installing the unit it is essential that all transport fastenings be
removed!
For in-house transport lift the unit and transport on a suitable wagon
(e.g. lift truck).
The work height can be set between 76 cm and 106 cm (measured to
the upper edge of the table).
The unit is set at a work height of 82 at the factory.
–
Loosen the locking screws 1 on both sides of the frame.
–
Set the base plate horizontally at the desired work height.
In order to avoid a tilt pull out or push in the base plate uniformly
on both sides.
–
Tighten the locking screws 1.
1
3