- ページ 2

ミシン Duerkopp Adler 506のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Duerkopp Adler 506 8 ページ。
Duerkopp Adler 506 にも：取扱説明書 (17 ページ)

1. Scope of Delivery

–

Frame with sewing drive and table 1100 x 736 mm

–

Sewing machine with integrated bobbin winder

–

Microcontrol control unit

–

Compressed air maintenance unit

–

Yarn stand

–

Foot switches

–

Sewing light

–

Tools and small parts in the accessories pack

ATTENTION !

The unit may only be set up by trained personnel.

Before installing the unit it is essential that all transport fastenings be

removed!

For in-house transport lift the unit and transport on a suitable wagon

(e.g. lift truck).

The work height can be set between 76 cm and 106 cm (measured to

the upper edge of the table).

The unit is set at a work height of 82 at the factory.

–

Loosen the locking screws 1 on both sides of the frame.

–

Set the base plate horizontally at the desired work height.

In order to avoid a tilt pull out or push in the base plate uniformly

on both sides.

–

Tighten the locking screws 1.