Danby DDW1801MWP Manuale di istruzioni per l'installazione - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Lavastoviglie Danby DDW1801MWP. Danby DDW1801MWP 11.
Stampa la pagina
WATER
CONNECTION
(cont)
INSTALLATION INSTRUCTIONS
1. Screw the faucet adapter onto (or into) the faucet tap. Check for
leaks (use Teflon tape to eliminate if necessary).
2. Connect the six-sided connection of the drain hose to the drain
port connection on the back of the dishwasher cabinet. Do not
over-tighten (to avoid damage to threads).
3. Connect the star-shaped connection of the inlet hose to the inlet
port on the back of the dishwasher cabinet. Do not over-tighten
(to avoid damage to threads).
4. Connect the circular connection of the drain hose onto the longer
(bottom) male connection on the quick connect.
5. Connect the circular connection of the inlet hose onto the shorter
(top) male connection on the quick connect.
6. Attach the quick connect onto the faucet adapter, by pulling down
the outer locking collar on the quick connect, while pushing the
quick connect upward onto the faucet adapter.
7. When the quick connect snaps onto the faucet adapter, release the
locking collar. Verify the connection is secure.
8. Slowly open the hot water line and check for any sign of water
leaks at all hose connections. If leaks are located, immediately
turn off the water supply and repair the hose connections.
1. Once you open the water supply line, (even if it is closed
immediately thereafter), the inlet hose will be pressurized.
2. To relieve water pressure from inside the inlet hose, (make
sure the water line (faucet) is closed): press and hold the
red pressure relief button on the quick connect until the
flow of water stops.
Failure to relieve water pressure before disconnecting the
quick connect from the faucet, will result in back pressure
over-spray. The temperature of the incoming water can be
very hot and can cause severe burns and/or scalding.
Do not let children disconnect the dishwasher. Close supervi-
sion of children is always important around appliances.
NOTE: Hard water conditions will adversely affect the washing
performance of your dishwasher. Hard water conditions will also
contribute to 'lime' (white film substance) deposits and/or 'scaling'
on the stainless steel surface of the dishwasher tub and heater ele-
ment, located in the sump underneath the removable filter screen.
To assist in minimizing these conditions, it is recommended to oper-
ate/rinse the inside of the dishwasher (empty) using 1 cup of white
vinegar once a week.
DISCONNECTING YOUR DISHWASHER
1. Shut off the water supply at the faucet.
2. Disconnect the power supply cord
3. Relieve water pressure
4. Pull down on the quick connect collar
IMPORTANT
WARNING
DANGER
3