Abtus MAX-HDMI44A-G Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Commutatore a matrice Abtus MAX-HDMI44A-G. Abtus MAX-HDMI44A-G 8. 4x4 hdmi matrix

Stampa la pagina

Method A: Push-in Button

preset

learn

2. Save Mapping Mode

1) Keep pushing "output+ (save)"button until

the output LED shows "d." to enter the

Save Mapping Mode.

2) Use the "+"or "-" input push button to select

the mapping configuration (1~8) that you

want to save current input/output mapping

3) After you select the desired mapping

configuration number, the LED will blink

twice and the mapping setting will be

saved

4) If you push the "output- (preset)"button

before the mapping setting is saved, the

LED will show " ̶ " " ̶ "to quit the Save

Mapping Mode

4. Default EDID Mode

1) Push "input+ (default)"button to select the

input channel which you want to learn default

EDID and then keep pushing "input+

(default)"button when you select your desired

input channel

2) Push the "+"or "-" output push button and

then the LED will show "E""d" one time to

enter Learn Default EDID Mode

3) Use "+"or "-" output push button to select the

default EDID mode(1~8)

4) Release "input+ (default)"button after

selecting the desired default EDID mode,

and then the LED will blink twice and the

setting will be effective

5) It will quit the Learn Default EDID Mode if you

push the "input- (learn)"button before the

setting is effective

6) The LED will show "0""0" if the setting is

success

The LED will show "F""F" if the setting is

failure

OPERATING SYSTEM

save

default

*Specifications are subject to changes without notice.

1. IN/OUT MAP

1) Use the "+"or "-" output push button to select

the display

2) Use the "+"or "-" input push button to select

the input source

"+": change selected input/output port in

ascending order

"-": change selected input/output port in

descending order

After you have selected the desired input/output

port, the LED will blink twice and the setting will

be in effect.

3. Preset Mapping Mode

1) Keep pushing "output- (preset)"button until

the output LED shows "P." to enter the

Preset Mapping Mode.

2) Use the "+"or "-" input push button to select

the saved mapping configuration (1~8)

that you want to recall

3) After you select the desired mapping

configuration number, the LED will blink

twice and the mapping setting will be

effective

4) If you push the "output+ (save)"button

before the mapping setting is effective,

the LED will show " ̶ " " ̶ " to quit the Preset

Mapping Mode

5. EDID Learning Mode

1) Push "input-(learn)"button to select the

input channel which you want to learn

EDID from HDMI output and then keep

pushing "input-(learn)"button when you

select your desired input channel

2) Push the "+"or "-" output push button and

then the LED will show "E""L" one time to

enter Learn Output EDID Mode

3) Use "+"or "-" output push button to select

the output port number

4) Release "input-(learn)"button after

selecting the desired output port number,

and then the LED will blink twice and the

setting will be effective

5) It will quit the Learn Output EDID Mode if

you push the "input+ (default)"button

before the setting is effective

6) The LED will show "0""0" if the setting is

success

The LED will show "F""F" if the setting is

failure