Abtus MAX-HDMI44A-G 매뉴얼 - 페이지 3
{카테고리_이름} Abtus MAX-HDMI44A-G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abtus MAX-HDMI44A-G 8 페이지. 4x4 hdmi matrix
페이지 인쇄Method A: Push-in Button
preset
learn
2. Save Mapping Mode
1) Keep pushing "output+ (save)"button until
the output LED shows "d." to enter the
Save Mapping Mode.
2) Use the "+"or "-" input push button to select
the mapping configuration (1~8) that you
want to save current input/output mapping
3) After you select the desired mapping
configuration number, the LED will blink
twice and the mapping setting will be
saved
4) If you push the "output- (preset)"button
before the mapping setting is saved, the
LED will show " ̶ " " ̶ "to quit the Save
Mapping Mode
4. Default EDID Mode
1) Push "input+ (default)"button to select the
input channel which you want to learn default
EDID and then keep pushing "input+
(default)"button when you select your desired
input channel
2) Push the "+"or "-" output push button and
then the LED will show "E""d" one time to
enter Learn Default EDID Mode
3) Use "+"or "-" output push button to select the
default EDID mode(1~8)
4) Release "input+ (default)"button after
selecting the desired default EDID mode,
and then the LED will blink twice and the
setting will be effective
5) It will quit the Learn Default EDID Mode if you
push the "input- (learn)"button before the
setting is effective
6) The LED will show "0""0" if the setting is
success
The LED will show "F""F" if the setting is
failure
3
OPERATING SYSTEM
save
default
*Specifications are subject to changes without notice.
1. IN/OUT MAP
1) Use the "+"or "-" output push button to select
the display
2) Use the "+"or "-" input push button to select
the input source
"+": change selected input/output port in
ascending order
"-": change selected input/output port in
descending order
After you have selected the desired input/output
port, the LED will blink twice and the setting will
be in effect.
3. Preset Mapping Mode
1) Keep pushing "output- (preset)"button until
the output LED shows "P." to enter the
Preset Mapping Mode.
2) Use the "+"or "-" input push button to select
the saved mapping configuration (1~8)
that you want to recall
3) After you select the desired mapping
configuration number, the LED will blink
twice and the mapping setting will be
effective
4) If you push the "output+ (save)"button
before the mapping setting is effective,
the LED will show " ̶ " " ̶ " to quit the Preset
Mapping Mode
5. EDID Learning Mode
1) Push "input-(learn)"button to select the
input channel which you want to learn
EDID from HDMI output and then keep
pushing "input-(learn)"button when you
select your desired input channel
2) Push the "+"or "-" output push button and
then the LED will show "E""L" one time to
enter Learn Output EDID Mode
3) Use "+"or "-" output push button to select
the output port number
4) Release "input-(learn)"button after
selecting the desired output port number,
and then the LED will blink twice and the
setting will be effective
5) It will quit the Learn Output EDID Mode if
you push the "input+ (default)"button
before the setting is effective
6) The LED will show "0""0" if the setting is
success
The LED will show "F""F" if the setting is
failure