Airwalk 50CM PRO SLIDER Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Bicicletta Airwalk 50CM PRO SLIDER. Airwalk 50CM PRO SLIDER 7.

Stampa la pagina
Move the caliper arm approximately 1/8 of a turn anti-clockwise, or until pads almost make contact with
the disc brake rotor and re-tighten the cable anchor bolt.
2. Use Allen key to adjust the regulator shifting pads to proper position.
3. Adjust the cable cover screw slightly to make sure the cable is fully tightened to the brake arm.
4. To test apply the brakes while trying to push the bike forward to ensure the brakes will stop the bike. If not
functioning correctly please repeat above steps
1
Brake pad replacement
1
Take off the caliper
4
vv
Set the pads into the
caliper
WARNING: Don't ride bicycle until the brakes are working effectively.
WARNING - Don't ride the bike until the brakes are functioning correctly.
2
2
Unfasten the outer
Take off the pads.
adjustable screw
5
Fasten
the
outer
adjustable screw
3
3
6
Assemble the caliper
to the fork
4