Airwalk 50CM PRO SLIDER 사용 설명서 - 페이지 4
{카테고리_이름} Airwalk 50CM PRO SLIDER에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Airwalk 50CM PRO SLIDER 7 페이지.
페이지 인쇄Move the caliper arm approximately 1/8 of a turn anti-clockwise, or until pads almost make contact with
the disc brake rotor and re-tighten the cable anchor bolt.
2. Use Allen key to adjust the regulator shifting pads to proper position.
3. Adjust the cable cover screw slightly to make sure the cable is fully tightened to the brake arm.
4. To test apply the brakes while trying to push the bike forward to ensure the brakes will stop the bike. If not
functioning correctly please repeat above steps
1
Brake pad replacement
1
Take off the caliper
4
vv
Set the pads into the
caliper
WARNING: Don't ride bicycle until the brakes are working effectively.
WARNING - Don't ride the bike until the brakes are functioning correctly.
2
2
Unfasten the outer
Take off the pads.
adjustable screw
5
Fasten
the
outer
adjustable screw
3
3
6
Assemble the caliper
to the fork
4