Airwalk 50CM PRO SLIDER 사용 설명서 - 페이지 5

{카테고리_이름} Airwalk 50CM PRO SLIDER에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Airwalk 50CM PRO SLIDER 7 페이지.

WARNING: DISC GETS HOT! Severe injury could result from contact

with the hot disc! Mind your legs, as well as your hands and don't adjust

directly after riding.

5.Test The Tightness Of The Stem Bolt And Handlebar Clamp

Brace the front wheel between your knees and try to move the handlebars up and down and

from side to side. The handlebars are secure within the stem and the stem within the fork

steering tube if no movement is detected when applying turning pressure.

6.Rear Tube and Rear Wheels Assembly

Attach the rear tube (6) to the main frame. Secure with two 8x50mm carriage bolts and Nuts (12).

Slide one rear wheel onto the axle end, slide the rear axle (7) through the rear tube and slide

another wheel. Secure both ends of axle with M8 washer and nut(part 13).

7. Adjustable Seat Assembly

Attach the Seat to the main frame with the two M8x65mm bolts and nuts (part 14) provided.

Seat can be adjusted by installing bolts and nuts into A&B, B&C or C&D as illustrated below.