Airwalk 50CM PRO SLIDER Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rower Airwalk 50CM PRO SLIDER. Airwalk 50CM PRO SLIDER 7 stron.

WARNING: DISC GETS HOT! Severe injury could result from contact

with the hot disc! Mind your legs, as well as your hands and don't adjust

directly after riding.

5.Test The Tightness Of The Stem Bolt And Handlebar Clamp

Brace the front wheel between your knees and try to move the handlebars up and down and

from side to side. The handlebars are secure within the stem and the stem within the fork

steering tube if no movement is detected when applying turning pressure.

6.Rear Tube and Rear Wheels Assembly

Attach the rear tube (6) to the main frame. Secure with two 8x50mm carriage bolts and Nuts (12).

Slide one rear wheel onto the axle end, slide the rear axle (7) through the rear tube and slide

another wheel. Secure both ends of axle with M8 washer and nut(part 13).

7. Adjustable Seat Assembly

Attach the Seat to the main frame with the two M8x65mm bolts and nuts (part 14) provided.

Seat can be adjusted by installing bolts and nuts into A&B, B&C or C&D as illustrated below.