Duke RUF 48 Manuale di servizio - Pagina 7

Sfoglia online o scarica il pdf Manuale di servizio per Frigorifero Duke RUF 48. Duke RUF 48 12. Refrigerated counter
Anche per Duke RUF 48: Manuale di installazione e funzionamento (8 pagine)

Stampa la pagina

Drain Maintenance – Base

Located at the rear of each unit is a drain hose,

which removes the condensation from the

evaporator coil and deposits it into a drain pan

for evaporation (see Figure 3).

Figure 3

Location of Drain hose and Drain Pan

If excessive water accumulates inside the unit,

check to see that the drain hose is connected

from the evaporator housing to the drain pan. If

water accumulates underneath the unit, check

to see that the drain hose is located above the

drain pan.

A level unit is essential for proper drainage. Be

sure to provide a level surface below the unit,

especially if the floor is not level. Keep the drain

pan free from dirt, dust and debris to prevent water

from backing up and overflowing from the drain

pan onto the floor.

Service Manual for Refrigerated Back Bar Model RUF 48

PARTS REPLACEMENT

Thermostat Replacement

General

The thermostat is located inside the cooling

compartment and is accessible through the

doors.

1. Disconnect unit from power source.

2. Remove shelves.

3. Remove shelf support.

4. Remove sheet metal panel.

5. Remove thermostat from back panel.

6. Remove thermostat probe from evaporator

coil.

7. Tag and disconnect thermostat wiring.

8. Remove thermostat from unit.

9. Install replacement thermostat.

NOTE: Do not kink thermostat probe.

NOTE: To ensure proper operation, place 8" of

thermostat probe into evaporator coil.

10. Install thermostat probe in evaporator coil.

11. Using tags, connect thermostat wiring.

12. Install sheet metal panel.

13. Install shelf support.

14. Install shelves.

15. Connect unit to power source and test.