Duluth Forge EL1346C Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Camino da interno Duluth Forge EL1346C. Duluth Forge EL1346C 10.

Button (F): °C / °F

Push button F to change the heat readout settings. °C for Celsius, °F for Fahr-

enheit. Corresponding icon will be shown on front screen after the button is

pressed.

This heater includes a remote control. Each remote control is shipped with a

plastic tab inserted into the battery compartment to prevent damage and power

loss. Please remove the plastic tab by pulling the plastic tab out of the compart-

ment. See below for directions to use the remote control:

Button (G): "ON" / "OFF" Button

Push button G to turn electric fireplace on, power icon on front screen will turn

yellow, the flame effect will come on when electric fireplace is on. Push button G

again, power icon will disappear, no flame effect.

Button (M): Low / High Heating

The default heat setting is high heating after the heater turns on, two heating

icons shown on front screen as high heating mode. Press button M once, it will

change to low heating mode, only one heating icon shown on front screen. Press

button M again, it will return to high heating mode.

Button (H): Dimmer (Brightness Decrease)

Push button H to decrease the flame effect.

M180017-1

OPERATING INSTRUCTIONS CONT.

Power

F/C

www.factorybuysdirect.com

H/L