Dulytek DM1000 Manuale di istruzioni - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Dulytek DM1000. Dulytek DM1000 10. Heat press
INSTRUCTION MANUAL: DM1000
OPERATING INSTRUCTIONS
SETTING
PRESSURE
STARTING
THE PRESS
SETTING
TEMPERATURE
Dulytek Equipment
www.dulytek.com
Turn the pressure knob
reduce it. Use it to adjust the vertical position of the top platen in relation to
the bottom platen during the lock-in. The larger amount of pressing material
may require a larger distance between the platens to successfully close the
press. Experiment lifting and lowering the press handle to make sure it locks
at the right height for you.
1. Lift up the handle
2. Flip the ON / OFF switch
the switch itself become lit.
Set up the desired temperature for both top and bottom platens using the
temperature control panel
degrees. You may need to experiment with the settings to determine the
best temperature for rosin extraction depending on the type of the pressed
material, its thickness, and weight.
1. Press SET button on the temperature control panel once (Figure 1).
SET TEMP indicator becomes lit.
2. Press UP and DOWN buttons to select the desired temperature in °F
(Figure 2).
3. Press SET button again to record the settings (Figure 3). SET TEMP
indicator turns off.
The press immediately starts heating the platens. The display shows rising
temperature, and HEAT indicator flushes during the heating stage (Figure 4).
Figure 1
Email: [email protected]
(continued)
A
clockwise to increase pressure or counterwise to
F
opening the press machine.
E
to turn the press on. The control panel and
B
. The panel is pre-programmed for Fahreinheit
Figure 2
B
Figure 3
Figure 4
© 2018 Dulytek
All rights reserved
PAGE 7