Dulytek DM1000 Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for Power Tool Dulytek DM1000. Dulytek DM1000 10 pages. Heat press

Print Page

INSTRUCTION MANUAL: DM1000

OPERATING INSTRUCTIONS

SETTING

PRESSURE

STARTING

THE PRESS

SETTING

TEMPERATURE

Dulytek Equipment

www.dulytek.com

Turn the pressure knob

reduce it. Use it to adjust the vertical position of the top platen in relation to

the bottom platen during the lock-in. The larger amount of pressing material

may require a larger distance between the platens to successfully close the

press. Experiment lifting and lowering the press handle to make sure it locks

at the right height for you.

1. Lift up the handle

2. Flip the ON / OFF switch

the switch itself become lit.

Set up the desired temperature for both top and bottom platens using the

temperature control panel

degrees. You may need to experiment with the settings to determine the

best temperature for rosin extraction depending on the type of the pressed

material, its thickness, and weight.

1. Press SET button on the temperature control panel once (Figure 1).

SET TEMP indicator becomes lit.

2. Press UP and DOWN buttons to select the desired temperature in °F

(Figure 2).

3. Press SET button again to record the settings (Figure 3). SET TEMP

indicator turns off.

The press immediately starts heating the platens. The display shows rising

temperature, and HEAT indicator flushes during the heating stage (Figure 4).

Figure 1

(continued)

clockwise to increase pressure or counterwise to

opening the press machine.

to turn the press on. The control panel and

. The panel is pre-programmed for Fahreinheit

Figure 2

Figure 3

Figure 4

PAGE 7