Casiiot SKU-SLCONT-24IR Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Controllore Casiiot SKU-SLCONT-24IR. Casiiot SKU-SLCONT-24IR 4. Smart wifi rgb controller & led strip
Stampa la pagina
4. Strip Installation Tips
• Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted to abnormal operation of the
device.
• Make sure the WiFi signal is strong while setting
up i.e. take the device close to wifi router.
Rule 1: Clean the surface
Please ensure that the adhesive surface is smooth,
and make sure the surface clean, flat and dry
before sticking the light strips.
Rule 2: Arrow to arrow
The arrows should be connected on the same line.
If the connection is not "arrow to arrow" the light
won't work. Warranty void if this step is not
followed.
Rule 5: How to cut strip
The light strips can be cutted every 3 LEDs along
the marks. And if you cut the strip, then only the
longest part of the strip will retain warranty, while
shorter part will be void of warranty.
Rule 6: Using IR remote
e-mail address
cation code
When using the remote control, please point the
receiver on the controller, and the maximum remote
control distance is 2m. Before using the remote
control, please pull out the transparent insulation
count with your mobile
s. Type in the veri cation
sheet inside the remote control.
or mail box, then set your
reate Family" to enter into
page 4
After the wiring of WiFi controller is done, press
the reset button for 10 seconds or more till the
strips attached ash quickly for pairing mode.
page 6
Rule 3: Adapter position
Always expose the Top surface of adapter to air for
heat transfer. Do not place the adapter upside
down, this will damage the adapter. (Top surface is
the surface of the adapter with sticker)
Rule 4: Always unroll the Led strip
The Led strip should always be un-rolled from the
reel while using, else heating will damage the leds.
5. App Setup
Step 1
1. Download Smart Life App
2. Log in or register your account with your mobile
number or e-mail address. Type in the
verification code sent to your mobile or mail box,
then set your login password. Click "Create
Family" to enter into the APP.
Step 2: Add device
Open the App. Click "ADD DEVICE" or "+" at the top
right corner. Choose "Add Manually" -> "Strip Lights
(WiFi)" option.
Add Device
Cancel
Add manually
Electrical
Smart
Lighting
Home
Appliance...
kitchen
Security
& Sensor
sport
& Health
Open the APP, selecting "+" on top right to add
page 5
Search Device
Lighting
Lighting
Devices
Devices
(bluetooth)
Lighting
Devices
(ZigBee)
page 7
Make