Danfoss RX1-S Manuale di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione per Termostato Danfoss RX1-S. Danfoss RX1-S 16. Wireless electronic hot water cylinder thermostat

Stampa la pagina
Danfoss RX1-S Manuale di installazione

Installation

!
This product should only be installed by a qualified
electrician or competent heating installer, and must be
in accordance with local wiring regulations.
1. The clamp on sensor should
be
mounted
cylinder wall at a height
equivalent to ½ the height
of the cylinder. Care should
be taken to remove any
insulation
the cylinder and to ensure
that the copper surface of
the cylinder is clean. See
diagram opposite for details.
4
onto
the
material
from
1/2 cylinder
height
CET2000B-RF