Danfoss RX1-S Installatiehandleiding - Pagina 4
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss RX1-S. Danfoss RX1-S 16 pagina's. Wireless electronic hot water cylinder thermostat
Pagina afdrukken
Installation
!
This product should only be installed by a qualified
electrician or competent heating installer, and must be
in accordance with local wiring regulations.
1. The clamp on sensor should
be
mounted
cylinder wall at a height
equivalent to ½ the height
of the cylinder. Care should
be taken to remove any
insulation
the cylinder and to ensure
that the copper surface of
the cylinder is clean. See
diagram opposite for details.
4
onto
the
material
from
1/2 cylinder
height
CET2000B-RF