Danfoss SET3M Manuale di installazione - Pagina 6
Sfoglia online o scarica il pdf Manuale di installazione per Termostato Danfoss SET3M. Danfoss SET3M 16. Electro-mechanical
24 programmer for
heating & hot water
Anche per Danfoss SET3M: Istruzioni per l'installazione e l'uso (20 pagine)
Stampa la pagina
10. Then press both WATER and HEATING rocker switches to the OFF
position and check that both services do not operate.
11. Finally, press both WATER and HEATING rocker switches to
TIMED position prior to programming the unit.
3.1 Wiring
GB
Typical wiring diagrams for various types of systems are shown on
the following pages.
Note: Whilst every attempt has been made to ensure the accuracy of this
information it is recommended that the specifi c information relating to
the ancillary controls is obtained from the manufacturers concerned.
NOTES:
FOR SET2E LINK
TERMINALS 1 & 5
FP975 ON A SET
WALLPLATE
NOTE: For mains voltage applications links must be fi tted between
terminals L, 2 and 5.
6
TIMER
N/O
N L 1 2 3 4 5 6
ON
N/C
N/O
COM
OFF
ON
DHW
N/C
COM
OFF
HTG
SET3M