Danfoss SET3M Instrukcja instalacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Termostat Danfoss SET3M. Danfoss SET3M 16 stron. Electro-mechanical
24 programmer for
heating & hot water
Również dla Danfoss SET3M: Instrukcja instalacji i obsługi (20 strony)
Drukuj stronę
10. Then press both WATER and HEATING rocker switches to the OFF
position and check that both services do not operate.
11. Finally, press both WATER and HEATING rocker switches to
TIMED position prior to programming the unit.
3.1 Wiring
GB
Typical wiring diagrams for various types of systems are shown on
the following pages.
Note: Whilst every attempt has been made to ensure the accuracy of this
information it is recommended that the specifi c information relating to
the ancillary controls is obtained from the manufacturers concerned.
NOTES:
FOR SET2E LINK
TERMINALS 1 & 5
FP975 ON A SET
WALLPLATE
NOTE: For mains voltage applications links must be fi tted between
terminals L, 2 and 5.
6
TIMER
N/O
N L 1 2 3 4 5 6
ON
N/C
N/O
COM
OFF
ON
DHW
N/C
COM
OFF
HTG
SET3M