Danfoss VLT MCD 200 Manuale di istruzioni per l'installazione - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Unità di controllo Danfoss VLT MCD 200. Danfoss VLT MCD 200 17. Usb module
Anche per Danfoss VLT MCD 200: Manuale di istruzioni per l'installazione (6 pagine), Istruzioni per l'installazione (5 pagine)
Stampa la pagina
Modbus Register
6. Modbus Register
Register
Address
Type
40002
Single Write
Command
40003
Multiple Read
Starter
status
40004
Multiple Read
Trip Code
1
40005
Multiple Read
Motor
current
40006
Multiple Read
Motor
temperature
40007
Multiple Read
Product Type
and Version
40008
Multiple Read
Serial
Protocol
Version
2
40009
~
Single Write
Parameter
and Multiple
management Read
Description
1 = Start
2 = Stop
3 = Reset
4 = Quick stop (coast to stop)
5 = Forced communication trip
Bit
Description
0 to 3
1 = Ready
2 = Starting
3 = Running
4 = Stopping (including braking)
5 = Restart delay (including
Temperature check)
6 = Tripped
7 = Program mode
8 = Jog forward
9 = Jog reverse
4
1 = Positive phase sequence (only valid if bit
6 = 1). Always = 0
5
1 = Current exceeds FLC
6
0 = Uninitialised
1 = Initialised
7
Always = 0
See Trip Code table.
Average 3 phase motor current (A)
Motor temperature (thermal model)
Bit
Description
0 to 2
Product parameter list version
3 to 7
1= MCD 3000
4= MCD 200
7 = MCD 500
Parameter 1-A (Motor FLC) to:
•
MCD 500 Par. 20-6 (Pedestal Detect)
•
MCD 3000 Par. 60 (Min Run Frequency)
MG.17.F5.02 - VLT® is a registered Danfoss trademark
MCD Modbus Module Instructions
4