Danfoss APP series Manuale di servizio - Pagina 8

Sfoglia online o scarica il pdf Manuale di servizio per Pompa dell'acqua Danfoss APP series. Danfoss APP series 12. Disassembling and assembling
Anche per Danfoss APP series: Manuale di servizio (12 pagine), Istruzioni per lo smontaggio e il montaggio (12 pagine), Istruzioni (10 pagine)

Disassembling and Assembling, APP 0.6-1.0

Service guide |

8 | 180R9092 | DKCFN.PI.013.EC5.02 | 521B0739

3. Fit the hollow bush (torpedo) to the shaft.

Wet the torpedo and replacement shaft

seal with soap. Do not use silicone

grease.

5. Using the plastic tool provided, large

diameter first, press the seal home against

the shoulder, by hand.

7. Push the new ceramic ring into the flange

using the plastic tool provided. Make sure

the face with the rubber seal is positioned

against the shoulder in the flange.

Wet the parts with clean (filtered) soap-

water before assembly.

4. Slide the shaft seal over the torpedo with

the carbon seal face pointing upwards. Be

careful not to damage the carbon seal

face on the shaft seal.

6. Remove ceramic ring from the flange.

8. Position the O-ring on the seal SAE flange.