Danfoss APP series Servis Kılavuzu - Sayfa 8

Su Pompası Danfoss APP series için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Danfoss APP series 12 sayfaları. Disassembling and assembling
Ayrıca Danfoss APP series için: Servis Kılavuzu (12 sayfalar), Sökme ve Takma Talimatları (12 sayfalar), Talimatlar (10 sayfalar)

Sayfayı Yazdır

Disassembling and Assembling, APP 0.6-1.0

Service guide |

8 | 180R9092 | DKCFN.PI.013.EC5.02 | 521B0739

3. Fit the hollow bush (torpedo) to the shaft.

Wet the torpedo and replacement shaft

seal with soap. Do not use silicone

grease.

5. Using the plastic tool provided, large

diameter first, press the seal home against

the shoulder, by hand.

7. Push the new ceramic ring into the flange

using the plastic tool provided. Make sure

the face with the rubber seal is positioned

against the shoulder in the flange.

Wet the parts with clean (filtered) soap-

water before assembly.

4. Slide the shaft seal over the torpedo with

the carbon seal face pointing upwards. Be

careful not to damage the carbon seal

face on the shaft seal.

6. Remove ceramic ring from the flange.

8. Position the O-ring on the seal SAE flange.