Dunster House ATLAS P5-3060PRG Manuale di installazione - Pagina 12

Sfoglia online o scarica il pdf Manuale di installazione per Arredamento per esterni Dunster House ATLAS P5-3060PRG. Dunster House ATLAS P5-3060PRG 15. Pergola

Stampa la pagina

Panel CP2

25x70x1065 Trim

M10x110 Bolts

Step 1.

•

Position the Panel CP2 between the Posts as shown in the diagram below. Join (2) Panel CP2 using (6)

60mm screws.

Connect the two end panels to the Posts using (3) 60mm screws per panel.

•

Please Note:

•

Fix the ends panel first and space the centre panel between them. (option to add sealant between the panel and

the post)

•

There maybe a gap between the panels, which is covered by the external and internal trims.

Assembly Steps for Atlas Pergola 6.2m x 3.2m

Half height wall panels assembly

60mm Screw

2969

2729

M10 Shield Anchors

M10x28 Washers

View from inside

•

M10x110mm

bolt &washer

M10 shield anchor

(

16 hole 80mm deep required)

** Quantity of components will vary,

depending on your purchase.

Fix the panels into the concrete by drilling

16 holes 80mm deep (2 per panel) and

inserting the shield anchors into the

holes.

Fix the panels by inserting M10x110mm

bolts and M10 washers and tighten until

secure.

Panel

Concrete

Page 12