Dunster House ATLAS P5-3060PRG Instrukcja instalacji - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Meble zewnętrzne Dunster House ATLAS P5-3060PRG. Dunster House ATLAS P5-3060PRG 15 stron. Pergola
Drukuj stronęPanel CP2
25x70x1065 Trim
M10x110 Bolts
Step 1.
•
Position the Panel CP2 between the Posts as shown in the diagram below. Join (2) Panel CP2 using (6)
60mm screws.
Connect the two end panels to the Posts using (3) 60mm screws per panel.
•
Please Note:
•
Fix the ends panel first and space the centre panel between them. (option to add sealant between the panel and
the post)
•
There maybe a gap between the panels, which is covered by the external and internal trims.
Assembly Steps for Atlas Pergola 6.2m x 3.2m
Half height wall panels assembly
60mm Screw
2969
2729
M10 Shield Anchors
M10x28 Washers
View from inside
•
•
M10x110mm
bolt &washer
M10 shield anchor
n
(
16 hole 80mm deep required)
** Quantity of components will vary,
depending on your purchase.
Fix the panels into the concrete by drilling
n
16 holes 80mm deep (2 per panel) and
inserting the shield anchors into the
holes.
Fix the panels by inserting M10x110mm
bolts and M10 washers and tighten until
secure.
Panel
Concrete
Page 12