Dunster House Artemis P3-3050PRG Manuale di installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione per Rifugi Dunster House Artemis P3-3050PRG. Dunster House Artemis P3-3050PRG 17. Pergola 3m x 5m

Assembly Instructions for Artemis Pergola 3m x 5m
Components required for Step 2
2x 140x45x2645.A
2x 140x45x2600.A
2x 145x145x2260.A
Step 2.
Using the same principles as shown in Step 1, position and fix the remaining beams and posts so that your
assembly matches the diagram below. Refer to the previous page for the plan view layout of the pergola.
Before securing the posts to the ground, use a spirit level to ensure that the posts are vertical and the beams are horizontal.
Now secure the pergola posts to the ground, using 1x 70x70x70mm Angle Bracket per post (fixings not supplied),
ensuring that the posts are plumb, beams are level and diagonals are equal.
Next, position and fix 2x 140x45x630.A onto each post. Use 2x M10x120mm Hex Head Screws and 2x M10x20mm
Washers to fix these.
140x45x2645.A
140x45x630.A
120mm Screw
140x45x630.A
140x45x630.A
140x45x630.A
140x45x2600.A
Flush
145x145x2260.A
M10x120mm
Hex Head Screws
and M10x20mm Washers
12x 140x45x630.A
24x M10x120mm Hex Head Screw
24x M10x20mm Washer
12x 120mm Screw
6x 70x70x70mm Angle Bracket
140x45x2645.A
140x45x630.A
140x45x630.A
145x145x2260.A
140x45x630.A
120mm Screw
140x45x2600.A
70x70x70mm Angle Bracket
Page 04