Conrad 518664 Istruzioni per l'uso - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'uso per Lettore di schede Conrad 518664. Conrad 518664 4. Sim/ memory card reader

Stampa la pagina

O P E R A T I N G I N S T R U C T I O N S

SIM/ memory card reader

Item no. 51 86 64

Intended use

The product can be connected to a computer's USB port. It is designed for reading and writing

to appropriate memory cards. As a special feature, the product contains a built-in SIM card

reader; the software provided enables a SIM card to be read.

This product complies with the applicable national and European regulations. All names of

Package Contents

• Card reader

• CD with software

• Operating Instructions

Safety Instructions

The warranty will be void in the event of damage caused by failure to observe

these safety instructions! We do not assume any liability for any consequen-

tial damage!

Nor do we assume any liability for material and personal damage caused by

improper use or non-compliance with the safety instructions! In such cases,

the warranty will be null and void.

• The unauthorised conversion and/or modiﬁ cation of the product is not permitted for

safety and approval reasons (CE). Do not open/disassemble it!

• The product is not a toy and should be kept out of the reach of children.

• The product must not get damp or wet.

• Do not leave packaging material carelessly lying around, since it could become a

dangerous plaything for children.

• Handle the product with care, it can be damaged by impacts, blows, or accidental

falls, even from a low height.

Driver/Software Installation

☞

The drivers provided are only required for the SIM card reader that is integrated in

the card reader.

The drivers for reading and writing common memory cards are integrated into the

operating system.

Switch on your computer and wait until the operating system has booted completely.

Place the CD supplied in the appropriate drive on your computer. If the installation program

does not start automatically, you have to start it manually, e.g. by using Windows' ﬁ le manager

(the installation program in the main directory of the CD is called e.g. "autorun.exe"). After-

wards, click on "SIM/SMART driver".

Follow all software or operating system instructions.

Connection

☞

If not already done, ﬁ rst install the driver and the software on the CD provided.

Connect the card reader to a free USB port on your computer or a USB hub.

When ﬁ rst connected to the computer, Windows recognises the card reader and completes

the driver installation.

When the card reader is connected correctly, the power LED on the upper side of the card

reader illuminates.

Reading/Writing from or to SIM Cards

www.conrad.com

• Start the software "SimEdit".

• Insert a SIM card in the proper direction into the corresponding slot on the card reader.

Version 10/12

• The software „SimEdit" detects the SIM card and reads it out. The ﬁ les can also be copied

back to the SIM card.

☞

Reading/writing to memory cards

An inserted memory card will be integrated into the operating system like a common removable

drive; a drive letter will be assigned automatically by Windows.

For instance, with Windows ﬁ le manager you can read the data on the memory card (or store

data on the memory card) in the same way as you use the hard disk or a USB stick.

Removing a SIM or memory card, removing the card reader

If a read/write access is underway to the memory card, wait until it is ﬁ nished.

Only after that, a memory card may be removed from the card reader resp. the card reader may

be disconnected from the computer.

☞

Tips & Notes

• Use preferably a USB2.0 port for connecting the card reader.

The maximum data signalling rate used by USB1.1 is only about 800kByte/s.

With USB2.0, several Mbyte/s are possible, depending on the speed of your memory card!

Therefore, for faster transfer always use a USB2.0 port for the card reader (a tremendous

saving of time during data transfer).

• Always remove the memory card or the SIM card ﬁ rst, before switching off the computer.

Disposal

Technical Data

Connection ...................................USB2.0 (USB1.1 compatible)

Useable memory cards .................M2, microSD, microSDHC, microSDXC (up to 64GB)

Useable SIM card .........................Standard SIM (25 x 15 mm)

Dimensions ...................................Approx. 49 x 24 x 11 mm (L x W x H)

Weight ..........................................approx. 7 g

With many SIM cards, a new device will be displayed in Windows' device manager

after inserting it. Before that, a yellow exclamation mark appears because the SIM

card has not yet been detected correctly. Ignore this, it is normal Windows behaviour!

It is not required to install a driver for the SIM card in order to read it out or to write

on it. Furthermore, very few SIM card manufacturers provide suitable drivers.

When the memory card is removed during reading/writing or when the card reader

is disconncted from the computer during this process, the ﬁ les on the memory card

could be damaged. The same applies to a SIM card.

Dispose of an unserviceable product in accordance with the relevant statutory regu-

lations.

These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,

D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁ lming,

or the capture in electronic data processing systems require the prior written approval by the editor.

Reprinting, also in part, is prohibited.

These operating instructions represent the technical status at the time of printing. Changes in

technology and equipment reserved.