Consort SLPBWIFI Manuale di installazione e controllo - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione e controllo per Controllore Consort SLPBWIFI. Consort SLPBWIFI 8. Wireless controller

Stampa la pagina

15. Automatic timer

The Consort Connect app has a 7 day automatic

timer. This can be set to switch the heater on/off au-

tomatically at certain times of day.

Each day has 24 time periods, one period for each

hour of the day. To set up your program, you must

select the required temperature for each time peri-

To access the program page, select the

Tapping an hour slot will turn it grey and bring up 2

options. These are 'Delete' and 'Settings'. Tapping

'delete' will default the temperature for that slot to

4°C . Tapping 'settings' will allow a temperature be-

tween 4°C and 35°C to be selected.

Multiple hour slots can be selected simultaneously

provided they are for the same day and they are in

sequence. For example, if the program needed to

be 22°C from 9am-5pm on Monday you would need

to follow the steps below.

Select the box after 09:00 Monday (the box will

turn grey)

Scroll down and select the box before 17:00

on Monday. All boxes from 09:00 up to 17:00

will turn grey.

Select the option 'settings' which appears next

to the grey boxes.

Select a temperature of 22°C.

Tap 'Done'

All boxes between 09:00 and 17:00 will be set

to 22°C and the heater will maintain this tem-

perature during these times.

Repeat these steps for all time periods so that the

heater runs as required.

16. Smart automation

The automatic program which is explained previous-

ly is only capable of switching the heating on/off in

one hour increments, I.e. the heating could not be

switched on at 10:30am, it would need to be either

10am or 11am.

The Smart automation feature which is also part of

the app can offer a solution to this. It allows an un-

limited number of programs to be set on every day

of the week.

To use it, follow the steps listed below.

Open the Consort Connect app and select

the 'Smart' option on the bottom of the

screen.

Select the '+' symbol located in the top right of

the screen.

Select the option 'Schedule'

Select 'Repeat' and choose the days which

the program is required to run on.

Select an execution time. This is the time the

program will be triggered.

Select 'Next'.

Select 'Run the device' and choose the de-

vice the program will control.

Select 'Mode' and then choose the operating

mode the heater will switch to.

Select 'Name' to name the operation

(optional).

10.

Select 'Save'.

Repeat these steps for all automations required. A

single time period would require two automations,

icon.

one to switch the heater on, and one to switch the

heater off.

You can activate/deactivate each individual auto-

mation without deleting it. To do this, from the main

app screen select the 'Smart' option and use the

toggle icon.

If automation function is used, the con-

troller must set to FROST mode and auto-

mation set to switch to MANUAL mode.

17. Group control

The APP can be set for group control where it is pos-

sible to control multiple heaters/controllers at once.

To set it up, open the app, select a heater you want

in the group and press the edit icon in the top right

hand corner. Select create group and follow the

instructions on the screen.

18. Self-learning function

This mode allows the SLPBWIFI to monitor occupancy

patterns and predict when people are likely to use

the room. Once a pattern is detected, the SLPBWIFI

will add the pattern to the automatic timer. The

learning mode will only switch the heater on

automatically if the product is left in auto mode.

Occupancy sensor data is recorded in a week

period. Time is divided into hour segments. Any

occupancy detected during the hour counts as an

'occupied' segment in the data. There are 2

different learning mode options available, 2 weeks

and 3 weeks. The default mode is the 3 week

learning period. In this operating mode, if there are

readings of occupancy at the same time and day 3

weeks in a row, then a pattern is detected and

added to the automatic timer. In 2 week mode, only

2 consecutive weeks are required. The parameters

can be viewed and changed via the app. To do this,

enter the settings menu and select the title 'self-

learning programme'.

After the

schedules immediately. It is recommended to leave

the heaters in manual mode with occupancy sensor

enabled for the period of 2 or 3 weeks to allow the

time schedules to be recognised by the heaters.

self-learning function

enabled, the heater will start

overwriting the existing time