Audiotechnik Dietz 66010 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Elettronica per autoveicoli Audiotechnik Dietz 66010. Audiotechnik Dietz 66010 13. Interface can bus

Stampa la pagina

Assignment of the wires with loose ends (Interface)

Red

Constant power

Black

Ground

Green

CAN - High

White

CAN - Low

Pink

Grey

Alternative second output for further signals – programming necessary!

Orange

If you use this output then you loose one of the other outputs!

Examples:

Possibilities:

Pink

(max. 1,5 A)

Grey

Orange

(max. 0,1A)

Installation

Interface 66012 was developed to get different signals out of the CAN Bus of the car. The interface read out

the signals for ignition, illumination, reverse gear, speed, parking sensors, hand brake and mute for Blue & Me

systems.

Self-Recognition

The selection of the protocol comes through SELF-RECOGNITION. After connections for inserting the module

to the connector are terminated, the unit will undertake the synchronization in a few seconds, signal led by

RED quick flashes of the module's LED.

As soon as the synchronization has been completed, the protocol of the vehicle must be selected. This

operation will be confirmed if the GREEN LED of the module is on.

Function setting

To change the output signal be sure that the interface is complete installed in the car. Connect the cables of

the Interface with the cables of the car. The LED must be green permanent.

To change the output from ignition to anything else please follow this example:

Example:

Change

Output 1 (pink cable) to "Positive output 12 Volt below 10 km/h (Function 14) and

Output 2 (orange cable) to "Reverse gear" (Function 3)

1. Output Ignition – default

2. Output Speedsignal – default for second output

Default

Ignition or

Rear Gear or

Ignition

Illumination or

Hand brake

Speed

ONLY 2 SIGNALS CAN BE USED !

Rear Gear or

Illumination or

Hand brake

Speed

12 V < 10km/h

Vertriebs-GmbH ● Germany

Rev 6, Stand: 2 / 2018

Ignition or

Rear Gear or

Illumination or

Hand brake

Ignition or

Rear Gear or

Illumination or

Hand brake, if not

already choosen for

output 1!