DAPAudio Beltpack set for COM-51/52 Manuale del prodotto - Pagina 8

Sfoglia online o scarica il pdf Manuale del prodotto per Sistema microfonico DAPAudio Beltpack set for COM-51/52. DAPAudio Beltpack set for COM-51/52 13. 790-812mhz, 2 beltpacks,2 lavaliers

Stampa la pagina

Changing the frequency of the transmitter

1) Press and hold the Set (9) button for 3 seconds. The display shows FREQUE. After a second, the display

shows the actual frequency while the MHz symbol blinks.

2) Use the Up (10) and Down (11) buttons to select the desired frequency.

3) Press the Set (9) button again to store the setting. The display will briefly show STORE. Now the setting is

stored in memory.

Locking the transmitter

The beltpack has a locking function. When activated, the locking function blocks all keys so you can't

accidentally switch the beltpack off or change the frequency while performing.

1) Press and hold the Set (9) button for 3 seconds. The display shows FREQUE.

2) Tap the Set (9) button again, the display will show LOC OFF.

3) Press the Up (10) buttonto turn the lock function on.

4) Press the Set (9) button again. The display will briefly show STORE. Now the setting is

stored in memory.

Unlocking the transmitter

1) Press and hold the Set (9) button for 3 seconds. The display shows FREQUE.

2) Tap the Set (5) button again, the display will show LOC ON.

3) Press the Down (12) button to turn the lock function on.

4) Press the Set (9) button again. The display will briefly show STORE. Now the setting is stored in memory.