DAPAudio Beltpack set for COM-51/52 제품 설명서 - 페이지 8

{카테고리_이름} DAPAudio Beltpack set for COM-51/52에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Beltpack set for COM-51/52 13 페이지. 790-812mhz, 2 beltpacks,2 lavaliers

페이지 인쇄

Changing the frequency of the transmitter

1) Press and hold the Set (9) button for 3 seconds. The display shows FREQUE. After a second, the display

shows the actual frequency while the MHz symbol blinks.

2) Use the Up (10) and Down (11) buttons to select the desired frequency.

3) Press the Set (9) button again to store the setting. The display will briefly show STORE. Now the setting is

stored in memory.

Locking the transmitter

The beltpack has a locking function. When activated, the locking function blocks all keys so you can't

accidentally switch the beltpack off or change the frequency while performing.

1) Press and hold the Set (9) button for 3 seconds. The display shows FREQUE.

2) Tap the Set (9) button again, the display will show LOC OFF.

3) Press the Up (10) buttonto turn the lock function on.

4) Press the Set (9) button again. The display will briefly show STORE. Now the setting is

stored in memory.

Unlocking the transmitter

1) Press and hold the Set (9) button for 3 seconds. The display shows FREQUE.

2) Tap the Set (5) button again, the display will show LOC ON.

3) Press the Down (12) button to turn the lock function on.

4) Press the Set (9) button again. The display will briefly show STORE. Now the setting is stored in memory.