Belimo FS Series Sostituzione - Pagina 11
Sfoglia online o scarica il pdf Sostituzione per Motore Belimo FS Series. Belimo FS Series 19. Replacement of multiproducts motors
Anche per Belimo FS Series: Manuale di istruzioni (20 pagine), Foglio di istruzioni (18 pagine)
Stampa la pagina
- 1. Table of Contents
- 2. Code and Standard Issues
- 3. NFPA 80 (Fire) & NFPA 105 (Smoke )
- 4. Local Code Approval
- 5. Cross Reference
- 6. Fire & Smoke Damper Technical Details
- 7. Replacement Instructions
- 8. Mounting Methods
- 9. Linkage Mounting
- 10. Miscellaneous Parts
- 11. Thermal Sensor Replacements - BAE165 US
- 12. Auxiliary Switches
- 13. Wiring
- 14. Building Official/Fire Marshal Notification Form
Distance at top must be
the same as at bottom
Figure 1
Allow any non-concentric shaft
motion to be taken up by
mounting stud in middle of U-slot
Air Balance Honeywell ML&MS Types to Belimo FSxx
Note how the pin of the anti-rotation strap
is mounted in middle of actuator U-slot.
Figure 2
This is acceptable as long as mechanically
solid.
Figure 3
-
Actuator must be
perpendicular to the
damper shaft.
Actuator should be
parallel to the plane of
the damper frame and
sleeve.
As long as it is mechanically
solid, the anti-rotation strap
may be bent to fit height.
March 2018
11