DAPAudio Powermix 1 Manuale - Pagina 14

Sfoglia online o scarica il pdf Manuale per Attrezzature per DJ DAPAudio Powermix 1. DAPAudio Powermix 1 18.

present at the RECORD SEND connectors, which let you connect a CD/MD recorder or TAPE/DAT deck.

The nominal level of -10dBV at this output is suitable for professional use as well as for home recording

purposes.

46) 2 Track Return L/R

47) Mono Output

(controlled by Fader 15)

48) Aux

49) Main Output L/R

Impedance-balanced outputs for the connection of external gear. The outputs are carried out as stereo

phone-type jacks. Whenever possible use balanced cables. Balanced cabling is the best method for

avoiding problems with interference and humming.

50) Power Amp Inputs L/R

It is also possible to only use the amplifier in the Powermix 1

51) FX 1/2 Footsw

You can connect a Footswitch to this jack. The footswitch makes it easy to switch between singing/playing

with an effect and talking to a croud without changing the effect settings on your mixer. Simply push the

footswitch and you can talk without an effect examp Delay, Hall, etc an instant.

52) Phones

You can connect a pair of headphones with an impedance of 32 - 600 Ohm to this Stereo Phones jack.

Balanced

1/4" TRS socket, wired as Tip=left, Ring=right and sleeve = ground.

37 / 38. FX 2 On/Off

You can press the FX 2 button (37) to turn this section

on. When the button is pressed the green LED (38)

lights up. It is recommended to

during announcements.

39. FX 2

You can change the FX value. The range is variable

from 0 – 10.

40. AUX 2

You can change the AUX value. The range is variable

from 0 – 10.

41) Stereo 7-8 and L / mono

42) R

43) Stereo 9-10 and L / mono

44) R

45) Record Send L/R

These connectors carry the MASTER

pre-fader audio signal, which means that

the setting of the master fader doesn't

affect the level of the audio signal that is

switch the FX-units off