Duratuf SENTRY SS2007 Manuale di istruzioni per il montaggio - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Deposito all'aperto Duratuf SENTRY SS2007. Duratuf SENTRY SS2007 16.

Stampa la pagina

ASSEMBLE DOOR

SELECT:

2 x 1.810m Door Sheets

2 x 1.810m Door Sheets 1 pan

4 x 0.715m Door Top/Bottom Flashings

4 x 1.810m Door Side Flashings

1 x 1.810m Weather-strip

6 x Hinges

1 x Padbolt Support Flashing

4 x 1.100m Door Brace Flashings

106 x Rivets

STEP 1:

•

Lay out 1 x 1.810m Door Sheet and 1 x

1 Pan Sheet on a flat surface.

•

Rivet sheets together in the centre

ensuring ends are flush with each other.

STEP 2:

•

Position door side flashings and top and

bottom flashings and assemble door as

shown, ensuring narrow face of flashing

is on the front as per fig.1

•

Drill and rivet as per diagram.

STEP 3:

• Attach hinges to door side flashing using rivets provided.

Ensure hinge is flush with back of door, and 60mm in from

each end as per fig.2.

• Using six rivets, attach padbolt support as shown in fig. 3

STEP 4:

• On the back of the door, place door braces in position

as shown in fig.4

• Ensure that the top and bottom ends of the braces

are under the door flashings as shown in fig.5 and

opposite ends of the braces overlap in the middle as

shown in fig.6.

• Rivet door brace flashings onto back of door as

shown. Where possible, rivet from front of door.

STEP 5:

• Assemble second door as above but attach weather

strip flashing to back of door side flashing using six

rivets ensuring it protrudes 20mm out from door side.

fig.1

Hinges

fig.5

fig.3

fig.2

fig.4

fig.6