Aplisens CS-27/BAK Manuale di istruzioni - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per Strumenti di misura Aplisens CS-27/BAK. Aplisens CS-27/BAK 13. Hydrostatic fuel level probe for installation on the fuel filler
Stampa la paginaIO.CS-27/W.CS-27/BAK
Unscrew the original filler cap.
Degrease the filler surface and probe body (1) with a cloth included in installation kit.
Apply silicone to filler surface and body (1).
Mount seal (2) on body (1).
Mount body (1) with seal (2) on filler. It is recommended to install the flange in such a
way, so that the wire does not protrude outside the vehicle.
Carefully drill Ø 4 mm openings in filler through mounting openings.
Place installation sleeve (3) onto blind rivet (4) and embed in riveter. Rivet both openings.
Secure the wire with protective pipe, clamp the pipe at wire outlet with cable tie, lead the
wire into driver's cabin in such a way as to minimize possible thermal and mechanical
damage resulting from regular usage of vehicle.
Thread the sealing cord with bead through sealing openings so that it does not screen
the rivet head, wrap the cord around the protective pipe and seal it.
Insert silicone into mounting openings and push in rubber plugs.
Cut off the protruding part of plug.
Screw the cap on. Unscrew and screw the cap back on several times to verify the
stability of mounting on the tank filler.
7.2
CS-27/BAK/60; CS-27/W/60 mechanical installation
Unscrew the original filler cap.
Degrease the filler surface and lower body (1) with a cloth included in installation kit.
Apply silicone to filler surface and lower body (1).
Mount seal I (3) on body (1).
Mount body (1) with seal I (3) on filler. It is recommended to install the body in such a
way, so that the wire does not protrude outside the vehicle.
6
02.B.003