APlusLift HW-10KBP Manuale di installazione e funzionamento - Pagina 15

Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Sistemi di sollevamento APlusLift HW-10KBP. APlusLift HW-10KBP 20. 2-post floor plate car lift 10,000lb capacity
Anche per APlusLift HW-10KBP: Manuale di installazione e istruzioni per l'uso (16 pagine), Manuale di installazione e funzionamento (20 pagine)

NEVER WORK UNDER OR NEAR THIS LIFT WITHOUT THE LOCKS BEING ENGAGED.

THE POWER UNIT IS NOT DESIGNED TO BE A LOADING-HOLDING DEVICE. NOT

USING THE LOCKS WILL RESULT IN A PREMATURE FAILURE TO THE CYLINDERS,

PUMP, AND/OR CABLES AND CAN CAUSE SERIOUS PROPERTY DAMAGE OR

PERSONAL INJURY! FAILURE TO HEED THIS WARNING WILL RESULT IN IMMEDIATE

TERMINATION OF YOUR WARRANTY!

FAILURE TO PERFORM THE DAILY PRE-OPERATIONAL CHECK CAN RESULT IN

EXPENSIVE PROPERTY DAMAGE, LOST PRODUCTION TIME, SERIOUS PERSONAL

INJURY, AND EVEN DEATH. THE SAFETY LATCH SYSTEM MUST BE CHECKED TO BE

WORKING PROPERLY BEFORE THE LIFT IS PUT TO USE.

NOTE: IT IS CUSTOMER'S OR USER'S RESPONSIBILITY TO MAINTAIN THE PROPER

TENSION ON THE EQUALIZER CABLES. ASK A QUALIFIED TECHNICIAN TO MAINTAIN

THE CABLE ADJUSTMENT AFTER THE LIFT IS INSTALLED.

IF AT ANY TIME YOU ARE NOT SURE HOW TO SAFELY OPERATE THE LIFT, STOP

USING THE LIFT AND CALL YOUR DISTRIBUTOR FOR ASSISTANCE.

 Lubrication. Lubricate all nylon block corners inside each column with heavy duty

bearing grease before the first operation and once every six months. Lubricate chains

every six months.

 Anchor Bolts. Check anchor bolts daily in the first week of use. DO NOT use an

impact wrench. After the first week, check them monthly for the first six months.

Tighten the anchor bolts if necessary.

 Concrete. Check concrete for stress cracks daily in the first two weeks of use. After

the first two weeks, check it monthly.

 Bolts and Nuts. Check all bolts and nuts every six months.

 Hydraulic Oil. The hydraulic oil should be changed once a year, along with cleaning

the suction filer.

 Safety Tips

◦ Never allow unauthorized persons to operate lift. Thoroughly train new employees

in the use and care of lift.

◦ Be aware that the power unit operates at high pressure.

◦ Remove passengers before raising vehicle.

◦ Prohibit unauthorized persons from being in shop area while lift is in use.

◦ Total lift capacity is 10,000 lbs. @ 2,500 lbs per lifting pad. Do not exceed maximum

weight capacity of lift.

◦ Before lifting vehicle, walk around the lift and check for any objects that may

interfere with the operation of lift and safety latches such as tools, air hoses, and

shop equipment.

◦ When approaching the lift with a vehicle, make sure to place the center the vehicle

between the columns so that the tires will clear the swing arms easily.

◦ Slowly drive the vehicle between the columns. It is recommended to have someone

outside the vehicle guide the driver.

Safety