Apogee Atomizer 05054 Manuale di avvio rapido - Pagina 6
Sfoglia online o scarica il pdf Manuale di avvio rapido per Giocattolo Apogee Atomizer 05054. Apogee Atomizer 05054 8.
Stampa la pagina
Display Stand Assembly
Display Stand Assembly
Remove the display stand pieces from the laser-cut
sheet. Assemble the leg pieces together. Run a thin
bead of wood glue along all the joints between the
pieces. When the glue is dry, the stand can be painted
and a rocket can be placed on it.
Launch Supplies Needed
Launch Supplies Needed
To launch your rocket you will need the following:
● A model rocket launch pad with a 1/8-inch (3.175mm)
launch rod and launch controller
● Rocket Recovery Wadding
● Several recommended 18mm Rocket Engines for the
Atomizer are listed in the motor chart.*
*Go to our website for a broader motor selection for this
kit at
https://www.apogeerockets.com/Model-Rocket-
Kits/Skill-Level-2-Model-Rocket-Kits/Atomizer#motors
Rocket Preflight
Rocket Preflight
A. Fold the parachute as shown.
B. Crumple and insert 2 or 3 sheets of recovery
wadding into the tube with a dowel. Slide the folded
parachute into the tube behind the recovery wadding.
Then slide the nose cone into the main body tube.
Page 6
*Atomizer Suggested Motor Chart
*Atomizer Suggested Motor Chart
Manufac-
Engine
turer(s)
Loaded
Estes
A8-3
Estes
B4-4
Quest
C18-4
Quest
D20-4
Aerotech
D13-5
Step A
Step B
Est. Altitude
Motor Type
Ft
Single Use
92
Single Use
204
Single Use
390
Single Use
487
Single Use
650
m
28.0
62.2
118.9
148.4
198.1