Apogee Skill Level 4 Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Giocattolo Apogee Skill Level 4. Apogee Skill Level 4 16.

10. Slide one of the larger green CR-24/29 rings

onto the front of the 24mm tube, then apply wood

glue forward of the marked line at the 1-9/16"

(40mm) location. Slide the ring into place so that

it is just forward of the 1-9/16" (40 mm) mark and

clean off any excess glue.

11. Apply glue to the forward end of the 24mm

tube and glue the second larger green CR-24/29

ring into place, flush with the forward end of the

tube.

12. Apply glue to the inside edge of the 3-3/4"

(95mm) long, 29mm body tube and insert the mo-

tor mount assembly, sliding it through the glue and

into the tube into it so that the aft ring is flush with

the edge of the body tube and the 24mm diameter

section of the assembly sticks out 1-9/16" (40mm).

13. Apply a bead of wood glue inside the forward

end of the assembled section and insert the red

coupler halfway, leaving 1-1/4" (32 mm) exposed.

14. Once the coupler is solidly affixed into the as-

sembly, apply glue to the interior of one end of the

13" (330mm) long, 29mm body tube and slide the

two pieces together. The main construction of the

fuselage is now complete and should be allowed

to dry prior to moving forward.

Page 4

Step 10

Step 11

Step 12

Step 13

Step 14

Flush with

Forward End