Apogee Skill Level 4 Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Apogee Skill Level 4. Apogee Skill Level 4 16 pagina's.

Apogee Skill Level 4 Handmatig
… 10. Slide one of the larger green CR-24/29 rings
onto the front of the 24mm tube, then apply wood
glue forward of the marked line at the 1-9/16"
(40mm) location. Slide the ring into place so that
it is just forward of the 1-9/16" (40 mm) mark and
clean off any excess glue.
… 11. Apply glue to the forward end of the 24mm
tube and glue the second larger green CR-24/29
ring into place, flush with the forward end of the
tube.
… 12. Apply glue to the inside edge of the 3-3/4"
(95mm) long, 29mm body tube and insert the mo-
tor mount assembly, sliding it through the glue and
into the tube into it so that the aft ring is flush with
the edge of the body tube and the 24mm diameter
section of the assembly sticks out 1-9/16" (40mm).
… 13. Apply a bead of wood glue inside the forward
end of the assembled section and insert the red
coupler halfway, leaving 1-1/4" (32 mm) exposed.
… 14. Once the coupler is solidly affixed into the as-
sembly, apply glue to the interior of one end of the
13" (330mm) long, 29mm body tube and slide the
two pieces together. The main construction of the
fuselage is now complete and should be allowed
to dry prior to moving forward.
Page 4
Step 10
Step 11
Step 12
Step 13
Step 14
Flush with
Forward End