Data Support DSC HFT1000M Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura Data Support DSC HFT1000M. Data Support DSC HFT1000M 14. Digital moisture analyzer

Stampa la pagina
Data Support Co., Inc * Toll Free 800-726-5883 * Tel: 818-988-7499 * Fax: 818-988-7671 * www.dsctest.com

4. TECHNICAL DATA

Admissible Ambient Conditions
Location:
Temperature:
Relative humidity:
Warm up time:
Height above sea level:
Power Input:
Voltage fluctuations:
Power load:
Power line fuse:
Protected against dust and water, Pollution degree: 2, Installation category: Class II
Specifications
MODEL
Capacity
Readability (% requires 2-3g sample)
Temperature Settings
Heat Source
Calibration - Weight
Calibration - Temperature
Pan Size
Unit Dimensions (DxWxH)
Unit Weight
Shipping Dimensions (LxWxH)
Shipping Weight
Communication
RS232 Pin Connections
GND
5
9
RS232 Data Settings (default)
Baud Rate: 2400
RS232 Commands
The RS232 Interface allows a computer to control the Fat tester, as well as to receive data such as displayed weight.
Command
ON
OFF
T
U
START
STOP
P
Indoor use only
20°C to 40°C
15 % to 80 % at 30°C non-condensing
At least 15 minutes after connecting the Fat tester to the AC supply;
when switched from standby mode the Fat tester is ready for immediate use.
Up to 2000 m
100VAC - 120VAC, 3A, 50/60Hz or 200VAC -240VAC, 3A, 50/60Hz
-15% +10%
MB25: 250W; MB23:300W (Maximum during drying process)
1 piece, 5 x 20mm, 8A 250V
Female DB9 connector
RxD
TxD
Pin 2: Fat tester transmit line (TxD)
1
Pin 3: Fat tester receive line (RxD)
6
Pin 4 and 6: Internally connected
Pin 5: Ground signal (GND)
CTS
RTS
Pin 7: Clear to send (hardware handshake) (CTS)
Pin 8: Request to send (hardware handshake) (RTS)
Data Bits: 7
Parity: N
Function
Turns Fat tester ON
Turns Fat tester OFF
Same as pressing Tare
Same as pressing %g
begins a test
ends a test
Same as pressing Print
HFT 1000
110g
1%
50°C to 160°C (5° increments)
Infrared
50g
DSC Temperature Calibration Kit
90mm diameter
11.0x6.5x5.0 in / 28.0x16.5x12.7 cm
4.6 lb / 2.1 kg
20.2x15.5x13.5 in / 51x40x35 cm
10 lb / 4.5 kg
Stop Bits: 2
9
Flow Control: Xon/Xoff