Data Support DSC HFT1000M Kullanıcı El Kitabı - Sayfa 10

Ölçüm Cihazları Data Support DSC HFT1000M için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Data Support DSC HFT1000M 14 sayfaları. Digital moisture analyzer

Sayfayı Yazdır
Data Support Co., Inc * Toll Free 800-726-5883 * Tel: 818-988-7499 * Fax: 818-988-7671 * www.dsctest.com

4. TECHNICAL DATA

Admissible Ambient Conditions
Location:
Temperature:
Relative humidity:
Warm up time:
Height above sea level:
Power Input:
Voltage fluctuations:
Power load:
Power line fuse:
Protected against dust and water, Pollution degree: 2, Installation category: Class II
Specifications
MODEL
Capacity
Readability (% requires 2-3g sample)
Temperature Settings
Heat Source
Calibration - Weight
Calibration - Temperature
Pan Size
Unit Dimensions (DxWxH)
Unit Weight
Shipping Dimensions (LxWxH)
Shipping Weight
Communication
RS232 Pin Connections
GND
5
9
RS232 Data Settings (default)
Baud Rate: 2400
RS232 Commands
The RS232 Interface allows a computer to control the Fat tester, as well as to receive data such as displayed weight.
Command
ON
OFF
T
U
START
STOP
P
Indoor use only
20°C to 40°C
15 % to 80 % at 30°C non-condensing
At least 15 minutes after connecting the Fat tester to the AC supply;
when switched from standby mode the Fat tester is ready for immediate use.
Up to 2000 m
100VAC - 120VAC, 3A, 50/60Hz or 200VAC -240VAC, 3A, 50/60Hz
-15% +10%
MB25: 250W; MB23:300W (Maximum during drying process)
1 piece, 5 x 20mm, 8A 250V
Female DB9 connector
RxD
TxD
Pin 2: Fat tester transmit line (TxD)
1
Pin 3: Fat tester receive line (RxD)
6
Pin 4 and 6: Internally connected
Pin 5: Ground signal (GND)
CTS
RTS
Pin 7: Clear to send (hardware handshake) (CTS)
Pin 8: Request to send (hardware handshake) (RTS)
Data Bits: 7
Parity: N
Function
Turns Fat tester ON
Turns Fat tester OFF
Same as pressing Tare
Same as pressing %g
begins a test
ends a test
Same as pressing Print
HFT 1000
110g
1%
50°C to 160°C (5° increments)
Infrared
50g
DSC Temperature Calibration Kit
90mm diameter
11.0x6.5x5.0 in / 28.0x16.5x12.7 cm
4.6 lb / 2.1 kg
20.2x15.5x13.5 in / 51x40x35 cm
10 lb / 4.5 kg
Stop Bits: 2
9
Flow Control: Xon/Xoff