DURKOPP ADLER 767-AE-5-73 Manuale di istruzioni - Pagina 9
Sfoglia online o scarica il pdf Manuale di istruzioni per Accessori per macchine da cucire DURKOPP ADLER 767-AE-5-73. DURKOPP ADLER 767-AE-5-73 16. Converting bobbin hook clb 300
Stampa la pagina
Umbauanleitung für Bobbinengreifer CLB 300
Instructions for converting bobbin hook CLB 300
1.
General information
1.1
Scope of delivery
2.
Conversion
2.1
Disassembling the components / Inserting the bobbin
2.1.1
Class: 767-FAS-573
Änderungsindex
Ausgabe/Edition:
03.2007
Rev. index: 0.0
767-FAS-573 & 767-AE-5-73
A conversion to the bobbin hook CLB 300 is possible with the
class 767-FAS-573 and 767-AE-5-73.
With class 767-AE-5-73 machines, delivered before January 1st,
2007, the rigid foot 0767 220143 (01.0) must be used.
On request: Slide 0767 140143 with sight glass for thread monitoring.
Before proceeding with the conversion task:
Please make sure that you have all components of the kit.
The complete kit for the transformation of the bobbin hook with the
order no.: 0767 150754 consists of the following components:
1x Hook
1x Manual
:
On request
1x Slide (with sight glass)
Attention! Risk of injury !
Turn the main switch off and remove the plug before starting
the conversion.
The transformation may only be performed by qualified
technicians.
–
Remove the slide.
–
Remove the counter knife.
–
Remove the thread-pulling knife.
–
Remove the throat plate.
–
Feed dog; remove the front screw and push it to the side.
–
Loosen the hook fastening screws and remove the hook.
–
Insert the CLB-hook, tighten the fastening screws (first
screw in the direction of rotation on the flat spot).
Printed in Germany
Teile-Nr./ Part-No.:
0791 767774
0767 150754
0791 767774
0767 140143
Blatt: 9
von 16
Sheet:
from